We are OPEN FOR BUSINESS!

Please be advised that each order is custom made so there may be delays in shipping during periods of heavy orders (like now). Each person's order will be handled as though they were our only customer so expect only the highest quality in our products.

Thanks for being one of our valuable clients and again, apologies for any delays,
Chuck

Dry suit with hood

Dry suit with hood
Side view of hooded dry suit Back view of hooded dry suit

Full rubber dry suit with attached hood. This suit is comprised of a jacket with hood and a pair of pants with feet. The complete suit is 2 pieces that are rolled together at the waist in order to provide a water-tight seal. In some cases, the addition of a waist band will discourage the unrolling of the two main pieces through normal body movement.

Buy Now!

Price: $249.00

Suit Size - Suit, Medium

Suit, Medium
Select

Min. neck opening 12" (30.5cm)

Max trim to 19" (48.3cm)

CHEST 40" (101.6cm)

WAIST 33" (83.8cm)

INSEAM 30" (76.2cm)

FOOT US 5 1/2, UK 5, EU 37 1/2

WRIST SEAL TO CENTER OF BACK 34" (86.3cm)

Height range from 5' 4" to 5' 9" (1.62m to 1.75m)

Suit Size - Suit, Large

Suit, Large
Select

Min. neck opening 12"(30.5cm)

Max trim to 20"(50.8cm)

CHEST 46"(116.8cm)

WAIST 36"(91.5cm)

INSEAM 32"(81.3cm)

FOOT US 9, UK 8 1/2, EU 43

WRIST SEAL TO CENTER OF BACK  36"(91.5cm)

Height range from 5' 9" to 6"( 1.75m to 1.82m)

Suit Size - Suit, X Large

Suit, X Large

$10.00

Select

Min. neck opening 15 1/2" (39.4cm)

Max trim to 22" (55.9cm)

CHEST 48" (122cm)

WAIST 40" (101.6cm)

INSEAM 34" (86.3cm)

FOOT US 12, UK 10, EU 44

WRIST SEAL TO CENTER OF BACK 36" (91.5cm)

Height range from 5' 9" to 6' 2" ( 1.75m to 1.87m )

Suit Size - Suit, XX Large

Suit, XX Large

$20.00

Select

CHEST 51", WAIST 42", INSEAM 33"

HEEL TO TOE 13"

WRIST SEAL TO CENTER OF BACK  36"

Height range from 6' to 6' 4"

Thickness - Standard weight

Standard weight
Select

Standard weight thickness is approximately 0.030 inches (0.6mm-0.7 mm).

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.

Thickness - Heavyweight

Heavyweight

$40.00

Select

Heavyweight thickness is approximately 0.040 inches (0.8mm-1.0mm),

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.
 

Thickness - Lightweight

Lightweight
Select

Lightweight thickness is approximately 0.020 inches (0.45mm-0.55 mm).

These products are manufactured by the dipping process so there may be some variation in the measured thickness between different areas of the garments. The thicknesses offered as options are approximate in nature and may not always be exact. In most cases, we'll try to get an average thickness that reflects the desired weight. There should not be a great deal of variation between the thickest portion compared to the thinnest portion but some variation will naturally occur.

Face Cut-out Size - Hood Size Extra Large (XL)

Hood Size Extra Large (XL)
Select
Measurements of exact sizing for XL hood will be supplied

Face Cut-out Size - Standard cut-out

Standard cut-out
Select
Standard face cut-out

Face Cut-out Size - Medium cut-out

Medium cut-out
Select
Medium cut-out

Face Cut-out Size - Small cut-out

Small cut-out
Select

Face Cut-out Size - No cut-out

No cut-out
Select
No face opening in hood. Please note that for safety and liability issues, there will be nose holes only to allow breathing if ordered with this option.

Color - Black

Black
Select
Black

Sales Agreement:

IMPORTANT:
These rubber suits are meant for collectors of vintage scuba gear and are NOT a substitute for a modern dry suit.The Hydroglove line of suits are meant to embody the nostalgia of vintage dive gear. They are not guaranteed as a 100% accurate copy of any known brand marketed in the last century. No other warranty is expressed or implied.

Latex Works LLC Hydroglove line of vintage style drysuits are a 100% latex product. End user assumes all risks inherent with any latex product. Diving is an adventure sport and it comes with inherent risks. Improper use of diving equipment or improper diving techniques may result in serious injury or, in extreme circumstances, death.

Please read our shipping FAQ for all warranty and return policy. By checking the accept box you agree to our terms of sale.

Print Agreement
I agree
Quantity:
Total:  

Reviews

Your opinion is important to us...tell us what you think!

Review This Product

Customers Who Ordered This Item Also Ordered

Waist Band  
Waist Band
$23.00
details
3-Finger Gloves  
3-Finger Gloves
$32.00
details
Surgeon's Gloves  
Surgeon's Gloves
$29.00
details
Hood  
Hood
$35.00
details